NEWS

Company News
Industry News
Exhibition

01

2023

-

03

What are the main features of Rear Light Lens Mold

The manufacturer of Rear Light Lens Mold tells you that there are brake lights, turn signals, running lights, etc. in the taillight assembly of the car. The light source of the taillight has gradually developed from the light bulb to the LED light source. The next development direction will be OLED light source and laser light source.

good price and quality Rear Light Lens Mold components
Rear Light Lens Mold is developing in the direction of three-color and four-color, and the taillight bezel is developing from a single-color mold to a two-color mold. With the merger of taillight parts, after simplification, there are both light distribution patterns and skins on the Rear Light Lens Mold. Appearance area required by texture. This leads to an increase in the difficulty of mold development.
Tail light product material ABS or PC+ABS. Aluminum plating is usually required. Most taillight housings have a complex structure. Generally, there are multiple reflector bowls on the front, which require aluminum plating, which requires high requirements. There are many inserts, and most of the features cannot be realized through normal demoulding. Mechanical mechanisms such as sliders, inner drawers, and inclined roofs are widely used. The manufacturer of Rear Light Lens Mold tells you that the lamp socket of the taillight housing should be made as an insert as much as possible. The bulb socket is punctured, and the shape of the left and right parts is generally shifted. It is easy to process, adjust and change when it is made into an insert. The ejection of the tail lamp housing mold is mainly based on the dome, and the tube top, flat top and block top are also often used. The Rear Light Lens Mold manufacturer tells you that there are many mold inserts for the tail light housing, so cooling and pattern inserts should be considered when designing the inserts. Larger inserts generally need to be drained, and some inserts need to be cooled with beryllium copper when necessary.

Related News

e-mail

Latest information of the company

We have become the core mould supplier of many world-famous automobile brands.

%{tishi_zhanwei}%